Welcome to the official website of Wuxi JHD Heat Transfer Equipment Co., Ltd.!

86-510-86966558 / 86-510-86966551 / 86-181-1536-9888

NEWS

Wuxi JHD Heat Transfer Equipment Co., Ltd.

Home page

ISH China Heating Exhibition

May 6-8, 2019, ISH China Heating Exhibition, our company (Wuxi Jinhard Heat Transfer Equipment Co., Ltd.) is also one of the exhibitors, booth E6-26C, looking forward to the presence of all buyers, we sincerely Warm service invites everyone to visit.

14

2022

/

07

Beijing Heating Exhibition

Beijing Heating Exhibition

The China Heating Exhibition has begun, and our company welcomes everyone to visit the booth for negotiation.

14

2022

/

07

What are the precautions before using the plate heat exchanger?

1. Before starting, first check whether the pipeline of the plate heat exchanger is one-way transportation, this purpose is to prevent the occurrence of liquid string. 2. Check whether there are impurities or dirt inside the plate heat exchanger, and clean it up in time to prevent blockage, open the outlet valve and close the inlet valve. 3. Check the inside of the heat exchanger and all accessories for corrosion, rust and damage. If the above problems do not occur, the device can be heated and used normally. If you are using in a special industry, remember to prepare accessories: decontamination filter and filter, which can avoid pipeline blockage and water pollution.

14

2022

/

07

What are the precautions for the use of plate heat exchangers?

1. When the plate heat exchanger is used, first check the usage of the overall equipment and the sealing gasket. If a failure occurs during use, it should be stopped in time, and records should be made to maintain the equipment. The maintenance methods of the plate heat exchanger have been sorted out for you, which can be used for reference. 2. Make sure that there are no impurities in the medium and check the concentration. During use, if there is a high-pressure medium, it means that liquid seepage has occurred inside the equipment. 3. The use of pressure gauges and various accessories should be carefully observed. When problems are found, they can be stopped and repaired according to the specific conditions. Since most equipment has a large setting value, the possibility of problems is low, and the pressure gauge will automatically stop. 4. After completing the technological process, slowly close the valve, do not directly unplug the power supply to cause equipment damage and reduce the service life.

14

2022

/

07

5.12-5.14 Beijing Heating Exhibition

5.12-5.14 Beijing Heating Exhibition, our company visited the site and witnessed the flow of people at the exhibition site. The exhibition effect was very good. Our company received many customers on the spot, and also gained many high-quality customers. Our company is a comprehensive company integrating product research and development, application design, production and sales, and technical services. It mainly produces energy-saving and environmentally friendly products such as plate heat exchangers, which are widely used in metallurgy, food, light industry, medical, chemical, refrigeration and HVAC and other fields. Looking forward to seeing you at next year's show!

14

2022

/

07

< 1 2 >

Leave us a message for the product you need / Service Hotline：86-18115369888

tel

PHONE

86-510-86966558 / 86-510-86966551

86-18115369888 ( Mr. Zhang )

add

ADDRESS

No. 90 Changle Road, Changshou Changshou, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China

email

E-MAIL

Copyrght © 2022 Wuxi JHD Heat Transfer Equipment Co., Ltd. Powered by www.300.cn | SEO

京ICP备10002622号-38